Tecmojo 9U Wall Mount Server Cabinet IT Network Rack Enclosure Lockable Door and Side Panels Black,Cooling Fan, Glass Door, 17.7inch Depth,for 19” IT Equipment, A/V Devices

Solid rack, this thing is heavy duty and well constructed. The parts are all either labelled or easy to identify. Everything fits together in a clever interlocking design that gives added strength. Fasteners are all Allen key / hex drive. If you pick up an inexpensive set of small hex driver bits for a drill or impact, it makes the assembly go super fast.The white color makes it much easier to see inside than typical black cabinets, helpful when doing cabling or re-arranging things. Looks clean on the wall.Tecmojo makes awesome products. Hopefully they will make some white drawers to match in the future, for now I went with Navepoint white drawers. They are ok, but Tecmojo quality is better.

When purchasing a brand that you're not familiar with, it can instill a bit of purchase hesitation. That said, I will not hesitate to purchase TecMojo products in the future as I'm very pleased with my purchase and customer service.I purchased the 18U unit and got it yesterday. I put it together right away and immediately noticed the packing was really good. There were no damaged corners or other parts, despite the box showing signs of rough handling. Everything was wrapped and padded well and all parts were in perfect condition. For the price point, I wasn't expecting 1/4" steel or anything, but I was impressed by the build quality. It seems to be built well and parts are of good quality. It's nice that all three of the locks use the same key. You get two keys for each lock, so you'll have more than enough keys.Customer service is excellent. I had an issue with the fan not working out of the box and it was resolved in under 24 hours. Amazing!The instructions are not fantastic with a few key items not illustrated. Assembly took about 20 or 30 minutes but may go quicker for you if you finish reading this message before you start. The below notes and attached pictures will help you get it done quickly and right the first time.1) The hex screws are for the frame, screwing into the square holes with nuts already in place. The other 8 machine screws and nuts attach the vertical rails to the inside of the frame.2) There's a small black washer zip-tied to the door. This is very important and not mentioned on the assembly sheet. This goes on the bottom pin of the door. Without this in place, the door does not close well because there's no gap between the door and the frame. The black washer adds that much needed gap. It's easy to miss it, so look closely. See picture.3) It was nice that many of the nuts for the square holes were already in place right out of the box. If you see one or two holes without a nut, look inside the box and in the corner areas of the parts. There were three that got knocked out during shipping, but they were in the corner of the front frame.4) The lock on the door requires a part not shown on the assembly instructions. It's a silver part with a round hole and one edge that's bent at 90 degrees. This goes on the inside of the door between the door and the washer and nut for the lock. The flat side lays on the edge by the glass and the edge that's bent goes directly on the door. This gives you a flat surface to install the lock whereas without it, installing the lock wouldn't be possible. See picture5) The locks on the right and left side have lock bars that have a bend in them. Make sure to assemble them with the bend going away from the lock so the lock bar latches properly. Otherwise the lock bar will hit the frame and not lock. See picture.Overall, I'm very pleased with this purchase and I will seek out TecMojo products in the future.

Bought two of these for the office, well worth the money. Well made, easy to assemble and looks really nice.

good rack, included top fan. Easy to assemble, works great. Has a lock and it works. Keep in mind its a shallower rack, so make sure your stuff will fit with a little room to spare!

All these bad reviews is people that don’t read full descriptions!! This was worth the price. I will say the guidelines and instructions are difficult but nothing to forgive out

For the price, this is a great purchase. Initially, I was concerned reading some of the other reviews - in my case, the machining seemed pretty much spot-on. The glass door (on the model I chose) had no protective film, the locking attachment seemed to be an afterthought and was loose, and overlaps the glass on the inside of the door - so tightening it without some additional work may risk damage to the glass. Personally I don't need to lock my cage, but the is no other latch - I can add a magnetic solution. The negatives are, so far, miniscule compared to the benefits. Would recommend, if anything comes up, will update review.

Overall, it is not a bad product buut.. I did run into some issues...1. The mounting template and wall mount holes did not Lineup..2. One of the posts were extensively damaged/bent3. several screws had damaged threads. we had some in the shop that fit..This is not really an issue but more of a wish it was better thing. The glass door is not very tight and makes noise if it vibrates or shakes... I added a rubber gasket to solve this. I will update if my client has any issues.the good: Equipment mounted up just fine. It locked ok.. It's not really keeping anyone out, but my client feels better seeing a lock. I will add an update if any significant comments from the clients.

Very high quality, easy to install on wall, easy to add shelves inside. Anyone that sees it is impressed with how organized our network closet is. Ours holds a 24 port network switch, a rack mount router, and a rack mount power strip/surge suppressor.