EGO BIKEBlack Motorcycle Trunk Tour Pack Luggage Compatible with Harley Honda Yamaha Suzuki Cruiser Tail Box Top Rack Backrest

Holes are easy to drill, and can be located from opening the unit for both bottom mount and rack on top. Smaller than a stock harley tour pak, but MANY hundreds of dollars less. Nice gloss black finish, chrome rack on top is nice. Holds my full face helmet with a bit of room to spare. I'm very happy with it. Well worth the money in my opinion.

The trunk arrived in perfect condition and on schedule. The finish is very good and the included hardware is of good quality but it would be helpful to at least know what the intended use of each is. For example there is a separate bag of bolts for the top rack. I decided to not install the rack although it is of good quality. A square and wide rack with bars would be the ideal base. My rack was a cnc factory fitting rack made for my bike. I decided to spread the load and increase the number of attachment points by using a 3/8 plywood base. I attached the plywood base first then drilled through the trunk and plywood for a total of 10 attachment points. It made the trunk very stable when leaning against the backrest. I cut the styrofoam packing from the shipping container to fit the thin black foam trunk liner. It made carrying items quieter. The trunk also does not make noise when riding.I would recommend this trunk if you don’t expect it to be a custom fit. It is well made although I suggest you check the hinge pins to be sure they are pressed in place. I expect good service for my light to medium use.

I mounted this trunk to a Harley quick release mount for my Softball Slim solo. It sets directly over the rear fender and provides the storage for when I go on long trips. With the quick release mount I can take it off when I get back and switch to the fender rack or passenger seat in seconds. The trunk is light weight but works perfectly for my usage. The included rack need extra work to drill the holes and mount because the trunk lid is not pre marked or drilled for the rack. It is an excellent deal for the price.

For the price they charge - i would say this is an excellent value. But you do not get what you do not pay for. for the price - it does the job. But some ofteh cons include. 1) There are no directions on how to mount the chrome rack on top of the tour pak - it took me a while to figure out how to do it and once I figured it out, it was easy. But come on - just throw a sheet of paper in the box guys with directions. 2) the back rest is at a strange angle and not 90 degrees to the seat so it is comfortable ( I plan to angle the entire unit at a down angle somehow to compensate for. this). 3) it is weak/flimsy construction.how I mounted the wire rack - removed black covers from four mounting post on the rack. Attached painter's tape top of the tour pak in areas where mounting posts of rack will sit. placed rack on top of tour pal and used a marker to mark painter's tape around the entire diameter of the mounting post. removed rack, drilled holes in areas I marked. removed painter's tape. placed black rubber caps with center holes over mounting posts on rack. Attached rack to tour pack with provided screws and washers.

So nice to have extra storage. My wife says the seat is comfortable. I installed it by slipping hose clamps between the box and the flat brackets that were included and tightened them to the luggage rack on my bike. I put two hose clamps on each side and it's very secure. Hope this idea helps someone. The rack on the top gave me issues. Only 3 of the 4 bolts would thread. I had to make a trip to the hardware store to get a longer bolt. I think it's because the holes have to be drilled perfectly to avoid this issue. I made a paper template to get the holes as close to perfect as I could, but human error prevailed. The rack looks great and is relatively easy to install.

Had to do some fabrication to get it on right

The lock mechanism fell apart and I have to painstakingly figure out how to put it back together. The pins in the hinges fell out while riding causing the top to pop open, only the cable on the inside kept it from falling off, potentially causing an accident! This is the 2nd trunk I bought from this company, thinking the first trunk was just a fluke, being of such poor quality. For the money spent on it, you'd think it would be a good, solid made trunk. Won't be buying again! Very disappointed!

I liked the fact that is spacious enough to fit a full-face helmet. It looks good and is easy to install. That said, you have to be mechanically inclined to be able to work any differences from your bike luggage rack and the hardware provided. One thing I would recommend to maker is to drill the holes on the bottom of the trunk evenly horizontally as well as vertically. My luggage rack only has the chrome tubes running from front to back, so I had to use the brackets horizontally (left to right), Unfortunately the brackets provided only fit the holes vertically (front to back) so I had to purchase hardware to make it fit. This can be easily fixed by maker by drilling the holes in a square fashion so hole distance from each other are the same in any direction. One very important thing that made me re-mount this thing, make sure that if your Bike has saddle bags, that they open freely before you secure this trunk, otherwise you'll have to manufacture or purchase a rack mount that can flip the trunk back so you can then open the saddle bags,