ELITEWILL Silver Aluminum Front Lower Engine Splash Shield Guard Under Tray Cover Skid Plate Fit for 2003-2009 Nissan 350Z & 2003-2006 Infiniti G35 and 03-07 G35 Coupe

2006 Nissan 350Z Convertible. Installed in 15 minutes. Perfect fit and best part it came with all hardware needed. Looks great and is way better than factory plastic cover. Very Happy.

Only took 15 minutes to install. Perfect fit and included all new hardware. Awesome value.

It fit surprisingly well unfortunately i dont have both wheel well well covers and what not so i wasn't able to put one of the bolts in but it still looks great it did not come with instructions which is a pain in the butt so ill do my best to explain on hereStep 1 remove the front skid plate only not the middle one as wellStep 2 remove the old clips on the front bumperStep 3 put the new clips on the front bumperStep 4 place the smaller piece with ths curbed in on make sure that the orientation is so that the lip of that pice is flush with the underside of the car in other words the piece on the opposite side of the curved end should face up not down to put it on place it just under the clips of the front bumper and put in the new screws that come with itStep 5 once you have screwed the front pice in to the front bumper you will leave the back half of the front pice alone for nowStep 6 take the big piece the side that has the little white bushings is the back side put the remaining metal clips on the front side ther should be 4 left then tuck the cliped side under the back end of the front piece makeing sure to align the holesStep 7 screw a couple in the front to hold the front together and the screw in the back so you can finish the rest hands freeStep 8 screw in the rest of the frontFinal step look over the rest to ensure you didn't miss any place to screw in for the sides in the front and the back use the existing clips left on the car

Good skid plate for my 07 g35 coupe bilted right up not modifications needed and held up over 3 yeats ov scraping a drifting. Plenty of extra heardweare for when they need to be replaced.

Fit really well. All holes lined up and hardware was included for install. If your front bumper has started to sag the plate will push it back up and out. This could make it a little harder to install. I also added some bigger washers on the front.

June 2021 - Packaged well, fast shipping, a nice sturdy under tray for the Infiniti G35 Coupe(Showed installed on 2003/2004 but should fit 03-07 models)Only reason for 4 stars is I was missing some hardware in the package, although there were a few clips already broken off my front bumper so I didn't need them anyway.It anchors to the front bumper/fender liner splash guards, as well as two anchor points on the lower radiator support, and two anchor points on the frame. The fold down door seems to have enough room to change the oil, as well as a machined opening on the opposite side to drain coolant.I found it easier to assemble both pieces of the tray (loosely) then attach it in the rear with the provided spacers. Next, attach to the front bumper, radiator support, then torque all bolts down. Be careful as 50 foot pounds of torque is enough to snap the hardware provided.

This was an easy install and I’d definitely recommend as it protects the underside of the engine bay. Good quality and definitely worth 70$

Perfect replacement for the plastic under shroud and a no brainer if if you don’t have one under there anymore. Perfect fitment and comes with support for the bumper. Only “con” if you can call it that is that you have to remove a section of the panel to service your oil but it’s only 2 bolts. Not much of a con in my eyes when I don’t have to worry about hitting my oil pan or any of my lines getting caught by rocks or sticks. Would definitely recommend to anyone with a Z or G chassis