Magic Splash Guard Kit - Prevent Water from Splashing out of the Bath or Shower- White

Adhesive strips that came with splash guards did not work. The tub is not totally flat snd the adhesive pulled away. I removed all of that and now have the splash guards fastened to my tub with nano adhesive strips. I cut the nano tape to size and it works wonderfully. Is much more effective but is removable if I wish to replace the splash guards.

I followed the directions and stuck it to the shower in my Trailer. It stuck fine until I decided to take a shower later on in the day and noticed the water seemed to absorb into the foam and broke up the glue or something. There is also a gap in the bottom portion where the corner is supposed to be sealed but it did not close up all the way. I attempted to return this, but Amazon will not let me return or replace this item. I’m very disappointed and feel like I got ripped off. I will buy a corner piece and use caulking instead and you should too instead of getting this.

If you expect to install these as-is, you will likely have problems.The first major problem is that they are at a pretty tight 90* angle - which unless you have a strict 90* angle in your shower, they won’t fit well. Because of this, you will want to caulk around it, otherwise it will leak water like a sieve.The second major problem is with the foam tape on the bottom and back mounting surfaces. On one hand, it’s helpful to hold it in place while you caulk. On the other hand, it runs the length of the mounting surfaces so it’s difficult to place them where you want them. The tape is quite sticky, so don’t plan on repositioning them without tearing out the tape and leaving foam and glue residue behind.The third problem with these is that there is a little hole actually built into the design at the bottom where the back and bottom intersect. So when you’re caulking around the edges, you should fill that in as well.The last problem I see with these is with the shower curtain clip - it’s completely useless. It is cut out from the back mounting surface and has its own strip of foam tape. The result is a clip that kind of operates somewhat independently of the splash guard, but not enough so that if you actually use it, the foam tape tries to pull up from the wall and leaks from the back (if you didn’t caulk). So I found its best to just not use the clip and caulk around it.In summary, these are actually pretty crappy. But I’ve bought a couple sets for different tub/showers solely because of the size. As I looked for other solutions, I couldn’t find anything that met my wants - they were generally too big or too tall (or both). So, for my wants, these are the right size - I’ve just learned that I have to use a good amount of caulk to mitigate the design and construction flaws. For me, that was worth it as they work well after having plugged all the holes with good shower silicone caulk.Overall rating is 3 stars because they work fine after you have used caulk to fix the design flaws.

Works perfect. Unless you're having a party in the shower

It works for what I needed, but it definitely wouldn't have if I hadn't read the reviews beforehand and didn't have silicone caulk ready to use when I installed it. The double-sided tape is really weak and, for some reason, stuck well to the tiles on my wall but just would not stick to the bathtub at all. It also has a hole in the corner for some reason, which I had to fill with caulk, otherwise the water would just escape through it anyways. Besides that, it is designed in a way that the bigger part is supposed to be on the fall for some reason, which for the life of me I can't understand, since water pools horizontally on the bathtub itself, not vertically on the walls. So I had to use it in a different manner from which it was intended to be used, which rendered the curtain clip completely useless.All in all, it has solved my problems, but only because I used it in a completely different way from how it was meant to be used, and installed it with extra stuff that doesn't come included in the box. I guess any chunk of plastic would've been enough to fix the issue that I had and this was the chunk that I found.

I really wanted to like this. We had our tub and enclosure replaced and for some reason now have water making it's way out while showering. While peeling the paper off the the tape the paper came off in 3 sections which concerned me. I stuck it on per the instructions and saw a few gaps. I was caulking other things in the bathroom and decided to caulk this to give me extra security from water leaking on my floor. There was even a weirdly placed hole near the bottom I filled with caulk since I knew that would be a problem since it was right where I tend to have the water issue. Waited 24 hours for the caulk to set and took a shower. There was a slow amount of water leaking somehow. For 10 bucks it may be ok, I was just hoping to prevent any water leaking because of those in my house who don't think to clean up the water before it becomes a problem. I might try again with some double sided tape in one full strip to avoid having to return.

If you have kids of any age (yes, even teens) you could probably benefit from these. They help keep the water from escaping through the end of the shower curtain onto the floor. Especially handy with the built in clips to hold the curtain in place. They stick in place and for extra measure I applied some caulking to the interior side after installation.