VEVOR Motorcycle Carrier, 600 LBS Steel Motorcycle Carrier Hitch Mount with 47" Longer Ramp, Scooter Dirt Bike Trailer Hauler with Ratchet Straps and Stabilizer, for Car, Truck with 2" Hitch Receiver

Structure is decent Vevor quality. First, I added a wheel chock w/Front wheel pin, and extended the ramp. Needed a chock to aim for and roll it into so it didn't fall off the skinny ramp. Front tire of your bike should be less than 5" wide, although rear can be wider. About 7" wide max on the rear w/o hanging over the Tube structuire. Also added side plates to the structure outside so I can Pin the Rear wheel also. 7" works for my bike's rear tire to fit. For insurance, added a couple more welds to the central 2 x 2 structure. I found a better hitch brace with larger U bolt (Less Side to Side evident) on Amazon for $9 and a couple stick on trailer lights to plug into my hitch connector. Side rocking isn't bad with both my bikes which seem weighted more towards the front rather than balanced. Set up for my 300 ish dual sport on a 2door F150 but may try a 420 Lb. bike on my Mini Van. Haven't tried,, hitch height when loaded should be OK. Theoretically my specified 3500 tow capacity can only take 350 Lbs of tongue weight, but hey if no fat asses in the 3 rd row, has to be worth another couple hundred?? Minivans rear Tires are rated for 50 psi, so some maneuvering i'd think.

Went together well, all parts accounted for and fit was perfect. This thing is built very well. Should hold 500 pounds easly. It is heavy and may need help to insert. A little overkill for an ebike but the bike isn't going anywhere. Pleased with my purchase

Decent but poor build quality. Threads for ramp hold down are garbage quality and need to be tapped in order to even use it

I got this over the aluminum versions because it is harder to cut and I’m happy with the steel quality. Assembly was easy the only problem, I hardly got any washers. Cheap fix but also should have been sold with a correct number of washers. Everything else works

Arrived in big heavy box. Product was easy to assemble with a lot of parts. Product is very heavy, especially with the detached ramp attached. It has a little wobble with the bike in place but is acceptable. Good access for tie downs on the frame. Works well

This stand is well made, durable and rugged. The paint is virtually unscratchable. You will need tools. 17mm and 19mm box wrench and a 17mm and 19mm socket wrench, deep dish preferred. Can't beat the price for this quality. Highly recommended!

Used on highway going 80 for about four hours help up really well super happy, make sure to use the bracket that gets rid of vibration and adds support!

I like in fact it looks nice. I dislike because some of the parts are missing. And some of the parts do not fit in. I got scam.