Phanteks Enthoo Luxe Tempered Glass PC Case PH-ES614LTG

This case is fantastic. Building my PC in this case was a smooth experience. Lots of space and the user manual was very helpful, detailing every aspect of the case as well as a guide for the screws that came with the case, all of which were a big plus for me considering I am a novice at building a PC from scratch. Would definitely recommend, especially to users who are inexperienced at building a new high end PC.

I have the white edition of this case and moving from the haf x to this was the best thing I ever did the watercooling possibilitys are brilliant for a beginner or a pro gamer this is a buy now product If you want room Watercooling options Expandability Features Fantastic cable management Fantastic air flow Then this case is for anyone

Has the owner of the much bigger brother the Phanteks Enthoo Primo SE I was expecting nothing but the best quality case build, the best airflow options, a well thought out Case from the Phanteks LUXE TG RGB, And boy have they delivered. With a choice of 2 colours black or grey this is only the limiting factor of the Phanteks Luxe, Made from Aluminium and glass with little plastic on show only the feet and some bezel around the glass that rgb shine on is plastic but it is of good quality you cant feel any difference and definitely cannot tell what is plastic just looking at it,There's ample room for the biggest of GPU's so no probz there, all the Gromit are well placed and plentiful but one or two are a little on the small side but again well placed, The rear takes a 140mm or 120mm and matching rads too but not if you want to do a push, push config in the roof, at the front you can install either x2 120mm fans and a 240mm radiator, x2 140mm but no 280mm radiator or so they say but I'm sure if you removed the HDD bays there would be room I will try and install my x62 at a later date this week and x1 200mm and in the floor there is room for x2 140mm fans and x2 120mm fans but if you want to install rads in this area you will need to remove the Shroud, in the roof its 3x 120mm, 2x 140mm maybe 3 at a push, in the roof there's plenty of room for push pull fan config, the PSU shroud is removable and held in by 3 thumb screws at the rear that are easy to get to but bare in mind all these thumb screws for the first time will need some force to remove them like a screw driver there well in there, the shroud also has a cable Gromit whole placed at the front but really I think it should have been on the roof of the shroud in line with Gpu cables pin connectors less cable travel then It comes with a Pump bracket and res brackets and a box of all the screw to build with the case plus spares, the pump mounting bracket is covered with anti vibration padding on the feet and main surface, The drive bay caddy is removable and held in by 2 thumb screws at the top and 2 at the bottom, but it also can be split in 2 so you can have 3 HDD suspended from the roof or on the floor and again this has anti vibration padding to keep noise levels to a minimum, There are also x2 SSD mounting point on the front side so can be seen through the TG and again there is adequate room for cables to route back to psu without been seen . The fans in the roof use a rail system but not removable, this is something I would have liked to see in a case of this price and calibre, ( Phanteks please make a removable Fan rail system in the high end water cooling cases) But with the amount of space you have in this case for mounting fans is a breeze, The TG is held onto the case by hinges at the rear and padded thumb screws keep it securely closed and don't need must turning before they drop off, I have my pc on a totally level stand buy the Tempered glass door falls open freely without prompt, but bear in mind that when you take out the TG thumb screws that just inside the case behind the TG is a little spring loaded button that is designed to push open the TG door away from the frame just in case it tries sticks shut on release of thumb screws, this caught me out on the first time and sprung open nearly knocking over a drink on my desk. Also I will mention this too, They do not supply the RGB adapter with this case you have to buy it separately if you want to use your on bored RGB lighting like Mystic Light or Aura, this is a oversight I think has they are clearly advertising it as Aura compatible and for the price it cost to buy the adapter they could just easily include it in the accessories box as not everyone has access to a bank card and Amazon. The RGB lighting to show where the leds are with spotting but it looks so sexy who cares anyway. At the rear side of the case there is plenty of room for cable management with tie downs everywhere and room to add more if you want to. So to round off, this case is a dream to work with, you wont come in to many issues other than what I have spoken about, This case is worth every penny, Highly recommend this case.

Case arrived fine just the box looked like Conor Mcgregor had a few words with its shipping box was fine thow 🙂

Boitier utilisé pour monter une nouvelle configuration pour un i7 9700kf refroidit par un watercooling corsair. Le montage s'effectue bien, la gestion des câbles est pas trop compliquée. L'espace entre la structure et la cloison arrière aurait pu être un poil plus grand. Les ventilos d'origine ne sont pas bruyants, je les ai laissés du coup. Le cache de l'alim et des câbles rend bien, comme l'ensemble du design, la vitre fait classe. La couleur grise est vraiment réussie, pas trop claire. Gros défaut : Il y a des filtres a poussière accessibles facilement pour les nettoyer sauf au niveau du... filtre le plus important, à savoir à l'avant. Il faut "arracher" toute la face avant du boitier, et faire attention de pas arracher les câbles. C'est tenu par des clips en plastique dur, et ça fait douter sur la durée de vie. C'est une torture de déclipser. Ça ne va pas du tout avec la qualité du reste de la tour, c'est vraiment dommage. Le reste est très bien.

Great case and got a great price on it. Love the led strip around the edges. Fantastic quality. My second Phanteks case. Would buy again.

The Phanteks PH-ES614LTG_AG Chassis/Tempered Glass Panel, Full Tower ATX Case, Anthracite Grey has been a pleasure to build with. The instructions concerning the LED lighting was not all that clear but we made it. It is spacious inside for building a great rig without pulling your hair out trying to make connections. It is quite the Hoss when completely loaded but I would rather it be that way than to have to worry about every bump or vibration. My only real pick against it is the control panel. I use cards quite a bit in my video work. As a result, I have to use a card reader. There is none and I have to use an adapter. I am unable to use a normal adapter as the card is upright against the control panel cover which sticks out a little. I have to use an extension USB cable to plug my card adapter into before I am able to transfer my data. As a result, I am adding an additional Internal USB drive bay expansion to the build.

Very well constructed and when I got it in person all I can say is excellent build quality, a good amount of fans. I removed the top fan and put it on the bottom of the case for another intake I need the top for a 360 radiator and this case fit the bill. I removed all the drive bays for unrestricted air flow, the 2 included 2.5" removable drive trays are enough for my needs. The grey looks amazing with the black interior and black accents. It does not seem to pick up fingerprints either. my only CON is the PSU cover is so long it covers my bottom intake fan so I guess the PSU cover will be left out of the build. Would be nice to have some venting or a cutout for a bottom fan install. Perhaps I will just FrankenCase it ;)

Big Big Tower. Tons of room depth and width. I didn't know how big it was until I got it out the box. It makes my old mid tower look like a toy. I probably would have purchase something smaller had I realized the size of this thing. The reason I purchased it was do to the (3) 5.25 drive bays and flip up panel USB front ports, which is all hard to come by with out looking like you bought a gaming case that looks like an 8 year olds transformer. All said, it's a very clean and professional looking case. Nice removable HD trays and great wire management with hidden power supply on the bottom and plenty of room for the kitchen sink if needed.