YAKAMOZDrill Angle Grinder Adapter with Flange Nut Parts Set, 6mm and 10mm Drill Arbor Mandrel Adaptor with 3 Set Replacement Grinder Flange Nuts and Spanner Wrench Conversion Tool

The item is not a perfect fit

Excelente 👌 👌 👌

Por quality

This is exactly what I was looking for; an adapter that allows me to make my drill double as a grinder, a sharpener, a buffer, etc!The only negative comments I've ever heard about such adapters is that they can come loose. OF COURSE THEY CAN! That's why GOOD engineers ALWAYS CHECK THEIR TOOLS MULTIPLE TIMES! I'm no exception.Simply put, any handy man who gets injured because he was too busy to check his tools, was asking for an accident in the first place!I'm in the process of clearing a large piece of land. Both my scythe and my hoe needed sharpening. This did the trick.Next month I'll be using it to cut some corrugated roofing I plan to make raised gardens out of. Grinding wheels are the best tool to use to make long cuts in metal sheets that are straight. The second best tool option are tin snippers, but on long cuts, it's very easy to get cut by the piece being cut off of the sheet.BTW, I know that a lot of people never sharpen their hoes; they just start using them in the same condition they purchased them.Unfortunately, when you buy a hoe they are deliberately dull-edged so no one cuts themselves while in the store. They expect the customer to know that the tool needs sharpening before use! You can either use a sharpening stone, or a grinding wheel. The wheel is quicker to use, but always be careful not to cut off too much of the edge.Once you sharpen a hoe, your work will require less than a quarter of the effort, and much, much less time!Oh, I forgot to mention that this kit comes with 3 sets of adaptors, both a long and a short shaft, and two wrenches. Definitely worth the price. The only thing missing were instructions, but it's pretty easy to figure out how to use them.

DIY MUST HAVE

This product isn't safe. It does not stay tight on the drill it loosens itself so that the blade actually flies off. I wouldn't recommend this.

Returned grinder too heavyNot used

The tightening tool bent the first time I was trying to tighten an attachment on. May work, but it could be better made. Just make sure not to over tighten. I believe the shaft and the lower piece should have been welded together instead of having several pieces to assemble.. debating whether to return, however, they are usable . I used blue Loctite on the threads as people say that they can fall apart.