SINGARO Car Rear Bumper Protector, 35.5inch x2.75inch Car/SUV Universal Rubber Anti-Scratch Trunk Exterior Accessories（Black）

The product did not fit my vehicle when it arrived. I lost my slip so I could not return it. I wound up throwing it away. What a waste of money

The bumper protector is great rubber quality, but the adhesive tape DOES NOT WORK. I decided to remove it, which it peeled off unbelievably easy. Next, I used a spray degreaser (gun cleaner) to remove any oils. Regular isopropyl alcohol should work too. Once it dried, I used 1-inch wide 3M strong double-sided tape and cut 3 strips to cover one side, then 3 strips to cover the other side. This will allow me to press it down firmly, starting from the center to the end...working on one half of the protector at a time. I did a test fitment beforehand, so it looked great, and no clearance issues with the tailgate. This is a nice protector and looked great based on the pre-fitment. Final install was easy to guide along the top edge of the bumper, keeping the end higher as it was pressed down. See pics attached.

Ladies, gentlemen, and fellow bumper enthusiasts, brace yourselves for the SINGARO Car Rear Bumper Protector, the accessory that declares, "I love my car's rear end more than life itself!" Get ready for a review that's as bumper-ific as it is bewildering.🚗 **Car, Who? It's All About the Bumper:** Who needs a car when you can have the shiniest, most scratch-free rear bumper in town? This protector will have you saying, "Car? What car?"🤷 **Universal Fit...or Universal Mystery?**: It claims to be a universal fit, but it might as well be a universal mystery. Good luck trying to figure out how it fits, where it fits, or why it fits.🎨 **Exterior Accessory...or Modern Art Installation?**: This so-called "exterior accessory" is like modern art for your car. It'll leave people pondering life's deepest questions, like "Why is that on your bumper?"🕺 **Rubber Dancer:** It's not just a bumper protector; it's a rubber dancer. Watch it groove and move with every bump, making your car the life of the bumper disco!🤦 **Anti-Scratch Dreams:** They say it's anti-scratch, but it's more like anti-sanity. Your friends will scratch their heads trying to understand why you chose this peculiar accessory.🪄 **Trunk Magic:** Installing this protector is like performing a magic trick. Presto! Your car is now unrecognizable, and your trunk is the star of the show.In conclusion, the SINGARO Car Rear Bumper Protector isn't just a protector; it's a bumper-centric lifestyle. It's like declaring to the world, "My bumper deserves the royal treatment." So, if you're ready to embrace the weird and transform your car into a bumper-loving masterpiece, this protector might be your ticket to automotive eccentricity. Just be prepared for quizzical looks and bumper-themed parties! 🚗🎨🕺

This is a nice rubber rear bumper protector, and it installs very easily. The 36" version fits the size and contours of the 2023 Mazda 3 Hatchback perfectly (using a little heat). However, the adhesive is not that great (definitely not 3M adhesive). The rubber is thick, and the raised ribs also add extra protection. The adhesive on the back is in three sections, with spaces in between. Some reviewers have complained about creases in those spaces, due to the folding of the bumper protector during shipping. Fortunately, the bumper protector I received was wound very loosely, so there was no creasing at all. I placed the bumber protector in the hot 105 degree sun for 30 minutes, which made it very flexible, and also helped to activate the adhesive. I then wiped the rear bumper down with Isopropyl Alcohol, and installed the bumber protector. I used a heavy roller to put even pressure on the bumber protector, and worked out the air bubbles. I then put the car out in the 105 degree sun for 30 minutes to help cure the adhesive. The bumper protector looks great, and is stuck to the bumper well. However, the adhesive sticks to the bumper better than it sticks to the rubber protector, as the protector lifts up a little on the edges. For now, the bumper protector is not coming off, but only time will tell how long it will stay on the bumper, or if the rubber will fade. However, for the very low price, one cannot complain too much, as this bumper protector is about $100 cheaper than the aluminum OEM Mazda bumper protector sold at the dealerships. I recommend this bumper protector, but just be aware that the adhesive could be better. However, using heat to apply the bumper protector really helps it stick, bend to the contours, and stay in place.

I used this for my Chevy equinox, and I really like it. My car hatch was causing some marks on my bumper and I wanted to protect it. It looks like it came with the car , and was easy to apply. I didn’t need to measure or cut anything. Great purchase

Looks slick but the adhesive isn’t the strongest.. I’d like to use it as a grip as well as for looks, however with the first adhesive layer that it came with, it easily slid off.. a quick trip to the orange store, n a new heavier adhesive strip later.. works great! Rubber seems to be holding up well! Just annoying needed to put more work into what should have been a 5minute max application!

Looks nice. Covers scratches caused by dogs jumping into car.

Worked great. Easy to install.