Supreme Suspensions - 3" Front Leveling Kit for 1994-2018 Dodge Ram 1500/1994-2011 Dodge Ram 2500 3500 2WD T6 Billet Aluminum Coil Spring Lift Spacers (Black)

Product is working fine, but I did have to cut away a decent sized chunk out of it to get the spring in a 2wd 2008 ram 2500 to sit flat. My springs do not continue the rtght coil at the very end, and these blocks do not account for it. The aluminum is soft and it cut away quickly with a 2” cutoff wheel. The lift was perfect. I am .5” higher still in the rear, until I load up a truck camper in the bed. Exactly level then. I did perform an alignment afterwards. The wheels angled out at the top pretty severely, but there was enough adjustment to get it back within spec. I purchased new shocks that were designed for a couple of inches of travel. You are very limited to aftermarket lift shocks on a 2wd. Non of the big names make one. Honestly, the blue Monroe shocks orielly’s for $30 worked great while I was waiting for the “better” ones to ship. I would just use them and see how long they last. They seem better built than my aftermarket and have a thicker rod and I think dampen slower/better. Anyway, the spacers do not seem to rattle. Steering feels good. The price was worth what they are if you are willing to spent 10 minutes cutting on them.

I’ve been looking for years for a leveling kit for my 2nd gen 2wd Cummins truck and had not found anything till I found this kit .I ordered the spacers and the shock extenders and it worked out perfectly drives smooth and I can fit 35” tires no problem so happy I found this kit .

I could not be happier with this kit. The front of my 2014 RAM Crew Cab 1500 looked ridiculously low in the front from the factory. I went with the 2" kit in black (so it's not noticed from profile of vehicle) and it actually looks now the way the truck should have looked OEM. Photo attached. It's just slightly higher now in the back but no longer on a steep rake.Product quality is exceptional. Unlike the urethane type spacers, this one will never settle and compress over time. It wasn't too bad to install in the driveway using a hydraulic jack and a stand. There are plenty of videos to check on the internet that show the installation. Just remember not to do the final torques until the weight is sitting on the front control arms or you will create torque bind.I cannot imagine there is any better lift product for the 2WD RAM (4WD will not work with this).

Doesn’t fit the spring perfect but definitely isnt a terrible fit. Would probably fit a new spring better than a worn out spring picks truck up perfectly level

I bought the 3" spacer for my 2014 Ram. I got it installed by a friendly mechanic I know. Only lifted the front 2.25" inches on both sides. The spacer is only 2 inches wide FYI. Before measurements were 36" in front and 39" in back. Would have been nice to get a solid 39" all around.Ride is a littlebouncy however doable. Just have to get used to it. Riding on the highway is ok not to much difference. Also get longer shocks. My mechanic told me stock shocks are doable however if I hit a huge pothole my shocks could bottom out. however I will be hitting no potholes or off-roading. Hopefully:) I will be getting fox 2.0s in the near future. Oh and get an alignment after!!!

This 2 inch lift leveled out my truck perfectly. Very noticeable in the look, noticeable when sitting in the truck and no poor effect on ride quality. No bouncy ride at all. Had alignment after install and rides and steers perfect. Lots of stickers and bottle opener too. Excellent price as well.

Got the 3" lift to go on my 17 ram 1500 2wd. Installation wasn't to bad. We put the truck up on a lift and still took us a couple hours. Those are big spacers and compressing the springs that much is a tough task.Would easily recommend this leveling kit to anyone looking to raise the front end. Tape wise, measuring from the pavement to the top of wheel cut in the fender I only have a ¼" difference between front and rear height. Not bad!Your ride quality is going to take a dramatic hit tho. No fault of this product, just a side effect of jacking the front end up. Suspension is maxed out and feeling every bump in the road much more now. Just a FYI. I'd still level the truck considering the drawbacks of the ride comfort.Product works great like described. Cheap leveling option!

I used this product on my 2010 Dodge Ram 1500 along with 1.5 rear lift spacers, 1.5 wheel spacers, and Fender flares. I actually only got about 2.5 inches out of them overall, but now the front and the back are only about 1/2 inch different.Rear Lift Spacershttps://www.amazon.com/gp/product/B089M6PY4L/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&psc=1Wheel Spacershttps://www.amazon.com/gp/product/B081MY9MHY/ref=ppx_yo_dt_b_asin_title_o02_s04?ie=UTF8&psc=1Fender Flareshttps://www.amazon.com/gp/product/B0197H52XQ/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&psc=1

Works perfectly on a '98 Ram

Absolutley very pleased with this level kit for my truck .. easy install an did exactly what they said it would !!!

It was great for the a little lifted 2.5inch to level the truck 2004 Dodge Ram 1500 (2wd).