VanTop V9F Dash Cam Hardwire Kit, 11.5ft Mini USB Hard Wire Kit for Dashcam Converts 12V-24V to 5V/2.5A w/Fuse Kit and Installation Tool, Over-Current Protection for Dash Cameras

VanTop V9F Dash Cam Hardwire Kit

Specification
Input Voltage: DC12V/24V
Output Voltage: 5V-2.5A Max
Working Temperature: -40~160°F
Over-current Protection: 2.5A
Connector Type: Mini USB
Cable Length: 3.5M/11.5FT

Package List
1 x Hardwire Kit
4 x Fuse Tap
4 x Blade Fuse
1 x Easy Pry Tool
1 x Quick Guide

TIPS
1)We strongly recommend the professional installation of the Hardwire Kit.
2)Please make sure the ignition is off before installing the Hardwire Kit.
3)Carefully utilize the tool to test and check the polarity and grounding before confirming the installation.
4)For safety reasons, we strongly recommend that you do not use any fuse slot used by any of your vehicle's critical components, such as the Air Bags.

Installation Steps
Step 1: Connect the Red Wire of the Hardwire Kit with one type of Fuse Taps that your vehicle requires.
Step 2: Locate the Fuse Box and find an ACC Fuse Slot in it. ACC Fuse Slot only has power when the ignition is on.
Step 3: Remove the original Fuse in the ACC Fuse Slot and install it into the Bottom Slots of the Fuse Tap. Insert the same size of Fuse we provided into the Top Slots of the Fuse Tap.
Step 4: Connect the Red Wire of the Hardwire Kit to the positive terminal of the ACC Fuse Slot in the Fuse Box.
Step 5: Crimp the Black Wire and screw it down to any non-coated metal bolt/screw in your vehicle to ground it.
Step 6: Connect the Mini USB connector of the Hardwire Kit to the Mini USB input of your Dash Camera, and then the installation is completed.

• Upgraded Thicker Core-The VanTop V9F Dash Cam Hardwire Kit uses high quality thickened wire for more stable conversion from 12V-24V voltage to 5V of your car. Good conductivity makes charging more worry-free..
• Four Safety Protections-The built-in safeguards protect your devices against over-current, short circuit, reverse connection, and overheating. Proactively filter hazards for you and use it with greater peace of mind..
• Free the Lighter-The original compact design of the VanTop V9F Dash Cam Hardwire Kit is easily concealed and does not obscure the view, freeing up the lighter for use with other devices..
• High Compatibility-Compatible 12-24V vehicles, easily power a variety of car electronics. The mini USB port is compatible with most dash cams, mirror dash cams, GPS navigators, and radar detectors on the market..
• Package List-You will get 1 x hardwire kit, 4 x fuse taps and blade fuses, 1 x easy pry tool, and 1 x quick guide. Please note that the top slot of the fuse tap is for the VanTop fuse and the bottom slot is for the car's original fuse..
• ›See more product details.