Full description not available
S**N
Can't wait to buy more!
The media could not be loaded. This machine is absolutely wonderful. Make sure to set the z offsets when reattaching the FDM tool heads which both are written on the manual -1.65dual -1.55single is mine seemed low but the print quality is fantastic I have used their z offsets for every print and had no issues at all. The cnc was a bit funky the bed plate wasn't an even thickness but was simple to fix with a micrometer and belt sander. The laser was non functioning when I received the machine support walked me thru a calibration test and had me send video of it in which they determined the head was defective and immediately sent a replacement which arrived in under a week and is in prime shape running as I write this. Overall great machine little to no effort compared to the other 2 I own. Even the autoleveling is way better than the acoustic auto leveling on my large printer. Will be buying more as 1 allows my company to produce 3 full drone aeroframes per day with minimal involvement of staff. If they produce a 500x500x500mm model my company will be switching to entirely ecubmaker.
T**V
Disaster
The product arrived OK, well packed. Then the problems started.The software is buggy and dysfunctional. It does not load. The error says 'Cannot locate 'Cura.exe' so it cannot find the curaware routine. The company blames the video driver. Come on now. There is a bug in the routine calls to the curaware.Even if the software worked, the machine doesn't It doesn't turn on. Great. The 24v plug is a tight bad fit. The power brick glows, but the machine does not turn on. Is there a 110/220 switch? Who knows? A fuse? Who knows? Not in the manuel.I am not looking forward to boxing this thing up again.Update: Amazon sent me a new machine. And this new machine turns on. However the machine will not 'home'. It rammed into the base. Then it shot upward. Now the 'machine head' just sits there making a horrible noise not moving. It gives an error on the set up screen.Is this company sure its product (machine) is complete, tested, and ready for retail sales? They have problems. Big problems.I noted that many people who bought in 2020 and in 2021 also experienced the same problems. Many of them actually tried 2 machines. I am now on my second machine and neither one is acceptable. The axis sensors are worthless. This machine is not ready for the market.Finally I was able to get this thing to 'home' - the axis sensors appears to work. However the filament nwo has broken off in 2 (two) Bowden tubes. Frustrating. I am going to leave the second filament in the tube when I send these back.This machine is like buying a car where the engine won't start. When it does you find out the transmission won't work, and the gas line is plugged.They have much more work to do!
T**R
the Over all machines work great but mine was not flat and had to take apart
It work get but when it was delivered I took it out and the printer itself was not even so I took it apart and switch one front leg with the opposite leg and it perfect now I did have problem with the z off set for FDM printing but the support was great but everything work good for the price of the machine just was a little shocked to find it was not even white the legs but work great and fit perfect in my spot
M**G
My first 3D Printer. Amazing experience!!
Bang on!! Although this is my first 3D Printer- I haven’t encounter so many issue to work on it. Just take several hours to know about the 4 functions one by one. Done all the test print provide on the SD card. And altogether I can say it’s quiet impressive.Before going to further details I wanted to mention that- their customer service was great. I contacted them for a confusion during CNC milling. And they reply within a moment with the proper details. That’s a great work!Among these 4 function on this machine so far I have spent much time in Laser Engraving. Doing some projects for my company. They have an independent software for Laser Engraving which is a great bonus when using this Functions. Cause it’s more likely a professional engraving function. I found it so much useful for my works.Doing some FDM printing too. Most of the model comes with good finishing. As I have new to this 3D Printing world, I thought that I may face some issue with the FDM. But overall it becomes so easy. Just needed to adjust the layer height and some other parameters.If I want to talk about the tools comes with the machine is ready to go. Actually I don’t need anything to start with it. All the tools and materials comes with it. Later I buy some filaments and wood sample for my work .At last I can say that- this is a good machine to start with. Not so hard to learn for beginners. Easy set up and easy to use software also. My good choice to have this 4in1. Time to move on.By the way thanks …
T**D
When it works, its a beautiful thing. The problems in thew comment
This printer works, when it does. I mean if you start it up with a fresh unclogged nozzle it will do a great job printing that one job. If you want another good print you will need to disassemble the nozzle and print again. It seems like it has a good method of unloading filament but it really just causes clogs. There is NOT a community around this printer. On 1 hand i can count how many files are available to print that improve this printer. The only one that matters is the E3D V6 mount on thingiverse. Download that as soon as you buy this printer and swap to e3d v6 nozzle. You are on your own now, the company who makes this is out of business and the software is unavailable unless you are like me and save the included files. SAVE THEM. If you buy this, please design new parts. If the autolevel breaks the printer is useless. So design a new caraige that allows a Bltouch, but that might be impossible since the autolevel doubles as a sensor for z-max and z-min. The laser works fine, the engraver works ok.
Trustpilot
1 day ago
2 weeks ago
