NuFun Activities Printable Iron-on Heat Transfer Paper for T Shirts, Light Fabrics, 6 Sheets 8.5 x 11 inch, Long Lasting, Durable, Professional Quality, Easy DIY, Non-Toxic, Made in The USA

It took me few times to get it right, but once I did my project turned out great! I laid the paper on and used a Teflon sheet over it. I used a heat press at 375 degrees for 25 seconds. Peeled paper off immediately while the shirt was still on the press and had no issues. I would highly suggest using a heat press! The print quality was good as long as your use a clear picture and the proper settings on your printer. I haven't washed them yet, but I am going to try that tonight. I had no issues once I played around with them for a bit.

The media could not be loaded. The best transfer paper ever! Nonstick and so easy and simple to use you get so much product it’s absolutely worth every single penny!

This was so fun. Worked great. I was so excited to wear an original with artwork from granddaughter

first - please review the instructions and print out on a blank piece of paper first. Also look at your printer properties to see what sources you have. The instructions state for Cannon pritner to use media "inkjet paper" and on high quality. This didn't produce a good transfer to use. I found a setting for "other papers" on my printer and they had the option for "T-shirt Transfer". This produced a clean print, but it will automatically mirror for you - so, DON'T mirror your design first. Using a heat press with teflon sheet transferred the design cleanly, but even with triming the excess before applying, it still leaves a clear film on the garment outside of the design. I think this would be fine for homecrafts, but is not suitable for gifts or sell.

I run a print shop and ran out of my go-to JetPro-SS and needed to get more transfers quickly, so I ordered a bunch of different ones to compare, and the results were very eye opening! These were all pressed on canvas tote bags at 375 for 45 seconds with heavy pressure using a commercial heat press and doing a hot peel (peeled immediately after pressing). Nufun is the clear winner in all areas. The finished image quality is by far the cleanest of all the transfers, and the carrier sheet that you peel off had the least amount of ink on it, it was also the easiest to peel and was already lifting a bit after pressing. At almost half the cost and with the best results NuFun is the clear winner and is now my absolute preferred choice for this type of transfer, and you can bet moving forward I'm going to be checking if this company makes other products I use because there quality is incredible!Images show from left to right: PPD, NuFun, JetPro-SS*** UPDATE ***I was able to reduce my press time from 45 seconds (which was needed for JetPro-SS to actually transfer) to a mere 20 seconds, and the transfers are actually even clearer now. They still release smooth as butter and are less yellowed since they were under the heat for less time. Did 100 tote bags for a client and these transfers where absolutely flawless! Just placed another order for 2x 100-packs just to stock up a bit. LOVE THIS PRODUCT!!!!

I wish I could give zero or negative star rating! I should have heeded the warnings of all before me who said this was trash. But I thought, well maybe they just did it wrong. No. They were right, this stuff is garbage and a waste of money!I purchased these to create custom designs on some tote bags to be used for awards for my local rabbit club which was hosting a show. I created the design and printed them off. The ink printed just fine on the transfer paper and looked great, vivid and bright colors. Everything looked perfect. Until it was time to iron them on.The first try to iron them, the material melted onto the iron as well as the transfer. creating such a goopy nasty mess. Okay, so the tote was the wrong type of fabric. My fault. So I bought new totes and tried again. Next tote, different fabric, even labeled great for iron-on designs, only a part of the image showed up. Not only that but there was this piss yellow edge around the entire image from the rest of the transfer that was not printed on. Gross, definitely not something I wanted to give as an award. Turned the heat down on the iron and tried again. Nope, this time the transfer melted and turned into a sticky nasty goop that I had to pull off the iron hot, otherwise my iron would have been ruined.Okay, one more try. I pulled out some old tee shirts and tried those. None, that was a no go. I spent over $75 in totes and transfers, and ink to have to gout last minute the day before the show and try to find something to give exhibitors for awards. The club ended up taking a huge loss on this. Of course, I couldn't return because I bought them too far in advance.

I wanted to make a gag shirt so I bought the cheapest I could find. They color printed pretty well, but the image was a little blurry once ironed on. Super easy to print and iron though. For simple jobs, this is the way to go! If you want something nice, I'd buy a better iron on.

Great