LIT-PaTH LED Flush Mount Ceiling Lighting Fixture, Dimmable 7 Inch 11.5W 900 Lumen, Aluminum Housing Plus PC Cover, Damp Location Rated for Bathroom, 4000K, 2-Pack

I like to preface my rating with I don’t care to give 5 star reviews unless the product really exceeds my expectations. With that being said, let me begin.I ordered some lights about a month ago. We live in the country, so there’s really not too much lighting from streets or city to rely on. I got them in today, the installation was not bad, pretty basic. We installed them in the kitchen, over the bar and the table. I can actually see in my kitchen, which with some of the lighting fixtures that are sold today, it’s anyone’s guess as to how well it will assist in you seeing anything. I will be ordering more of these!The package claims you’ll never have to change the bulbs. The lighting is much better than expected. Being hard wired, this will be interesting to see how long they actually last. I’m pretty shocked with how cost efficient they are, and hopefully they will last a bit of time.If I can remember, I will post an update in about a year if they are still working as expected.

I just installed 4 of these in a garage, and they light up the area really well. The lights are bright, and they look great on and off.Beware before buying, though, that the screw holes on my fixture box holes did not match up with the keyholes on these lights. I ended up only using one screw to attach these. Since they are light, I'm not too worried about it, but both would have been ideal. To be extra sure they won't come down, you could use a washer in addition to the screw.

I like the quality of the light. I have it in a small water closet that is about 7' by 4' This light is 8' up from the floor and does a nice job in it's 3000K version. Please note you must install this like an electrician would. You need to know how to strip and wire-nut wires together. Another odd thing is that the screw holes are wider apart than the standard ceiling box used for lights. It's 3.5 inches instead of 3 inches. Only one screw is enough to hold this lightweight fixture in place, but I still need to get another screw installed to make it perfectly flush. I recommend this, but know it is slightly non-standard.

I needed an LED light fixture I could use to convert a 20 year old Halogen 150w floor lamp. This item was the perfect solution. It is well made, bright, dimmable, relatively inexpensive and what appeared like the perfect solution for my lamp conversion project. It mounted up perfectly in this old floor lamp after removal of the old high-heat electricity sucking 150 w Halogen bulb and fixture. I only needed a quick and easy way to mount this new LED fixture to the lamp. A 1/2" pancake 4" diameter round light fixture box solved that problem. Now I have a bright, dimmable, energy efficient like new floor lamp that is even voice controlled with the use of an Alexa controlled smart electrical outlet. What a great well-made fixture that also has a 5-year warranty. I am extremely pleased with the results of my conversion project.

Nice product, bright even cool-white light. Slide on lens works well. There are two issues, though. First, the mounting keyholes are only provided on 3.5" centers, and many ceiling boxes have mounting screws on 4" centers. I had to drill two additional holes in the base of the light to line up with my ceiling box. Second, the flange around the perimeter of fixture is very shallow. After mounting, the fixture was not tight to the ceiling, but resting on the flange of the ceiling box about 1/4", which results in a halo of light visible between the fixture and the ceiling; no obvious way to correct this light leak unless caulking is used. Overall, nice product, good price, pleased with them!

I bought it based on the fact that it is made for 110 volts outputs, as the market in my country shifted to 220, due to a government decision, with no regards to buildings and homes that were based on the old system.Distributers are claiming that they have lights that can operates on both voltages, through selling lights with a voltage converter, which is built in. It always fails, and if you are lucky it will last for a year, and you are fortunate if it functions after that.In other words, distributors are ripping us offand there is no official body to control corruption, therefor, I did my research, and found out that the N.A. are using 110 volts, which complies with my home requirements.on that basis, I made this order.Considering my background, about such products, I see the price a little bit high; however, I am not sure about the value for money aspect, as I am dealing with this brand for the first time, and it is not available in my country, to get a second opinion, so I bought it based on an internet review.To conclude, I’ll have to try it out myself, to determine whether it deserve the price I paid for or not.

Pros: The light have good coverage bright enough for my hallwaysEasy to install 10min-15minCons: this might just be bad luck but only one for the lights I received worked took me a while to figure out the problem which was the white natural wire wasnt connected to the led motherboard. Now I have to options send them both back and get a replacement or use a Soldering Iron and connect the netural. 🤔

We just bought a 20 year old home that had a bunch of old single bulb fixtures where the lighting was uneven and the watt maximum did not allow for a really bright bulb. These are very easy to install if your current fixture is in a standard light fixture box. It comes with screws and wire nuts too.Works great on a dimmer if you don't want "full on" at times, like in a bathroom at night, or want to use an Alexa compatible remote control dimmer.

This was the second time a bought this 2pack light kit. One of the lights was defective, just didn't turn on. I contacted Amazon and they had me contact the seller directly. I contacted them on a Sunday, by the next Wednesday I received a package from Amazon with a new replacement kit. Excellent service and the lights work very well. Thanks!

Works perfect in the short ceilings in my mobile home. No special fiddling around with it - just unscrew the two bolts holding up your old fixture, twist, remove wiring, redo wiring on new, align bolts, tighten, and done.The 3000K feels like a cross between a neutral light and the warm glow people prefer in homes. Doesn't mess with whites too much, but at the same time feels "cozy." Pretty spot on where it should be on the colour chart, so this light has that going for it. The light also easily pushes out its rated lumens.Only thing I didn't like about this fixture was that the wiring was not tinned at the ends. Not a big deal really.

I'm an electrician and I bought these for a friends furnace room and basement living room. The output is very good. Crazy easy to install (right onto the octagon junction box) and nothing sticks up into the jb other than the wires so you don't have to worry about box fill. I'd buy them again when I need em.

Love these lights. I had them up and running within an hour. They are great. This wattage is perfect. The light is bright and strong. It fills the room and yet it is not painful to look directly at it. I ordered four. Right now I have them on ceiling and on walls at about 8 feet. Very comfortable. I am buying more of these to replace a few other very old fixture around the house.

Simple lights, not flashy, flush to the ceiling. If you look up when the lights are on it looks like pot lights. They are nice and bright and I love the dimmer effect. Little disappointed when I got them and realized I had to buy my own dimmer switches.