artgeist Wall Mural Beach Sea 116x83 in - Peel and Stick Self-Adhesive Wallpaper Removable Large Sticker Foil Wall Decor Print Design Mural Nature Landscape Sky Sun c-C-10032-a-a

Love this mural! I had to order a much larger size to get the width I needed. It is like a light weight contact paper. I centered the section I wanted to use and cut off the top and bottom. Make sure you have the space to lay out and cut. Measure carefully. This image had lines in it that were easy to match up. Definitely use the technique of applying it and peeling off the back diagonally. It helps to have an extra person hold it initially so you're sure it's straight. The first two panels I did got a couple wrinkles, but I improved by the 3rd-5th panels. The image is well done.

This absolutely takes me to my happy place! Once up, it looks beautiful and 3D. However, you need to plan before you put it up. Measure the middle of your wall. Start from the middle with panel 3, then apply panels 2,4,1,5. They are sticky and take patience to put up. Align the horizon first. Then remove the backing going outward. It took me 6 hours to put it up. It's not perfect. But for the price and affect, it is totally worth it! I love it!At the Beach Every Day

The image is beautiful, and actually looked much better than expected. Installed it on a wall in a newly finished basement. The difficulty in the installation is that you do need to carefully match each piece to the one hung before it, and with this image, the easiest place to match is in the middle of the image where the horizon lines up, but in order to do that, you may have to reposition each strip several times as you work your way from the top down. The backing is incredibly sticky. It sticks instantly to everything, the wall, itself, your hands, etc. You have to carefully peel it apart or risk tearing the image. It is pretty tough, but it wrinkles easily and the wrinkles stick to each other and have to be pulled apart and smoothed out carefully. The first piece took my wife and I nearly 2 hours to install as a I needed to trim around a bulkhead and had trouble there. Once you cut it to fit around something, it tears extremely easily. The second strip was almost as difficult, but by the 3rd strip, we got a system down that seemed to work better, by only removing about 4 inches of the backing at the top, lining it up the rest of the way down with the backing still on, and then working our way down, smoothing as we went, and peeling the backing straight down by pulling it slowly on each side. On the 5th strip, that system failed us, as when we got to the horizon line, we discovered that even though we had matched the cloud pattern above, we were about a 1/8 inch too low when we got to the horizon match and had to remove the entire top half of the strip to reposition it. Once you remove it, and reposition, it takes ages to smooth it all out again. There were 8 strips in total, and the job took us about 7 hours to complete. Although we're very happy with the final result, I would not attempt this again. Pre-pasted wallpaper is much easier to hang than this peel and stick, since you can easily reposition it when it's wet.

It really is beautiful. It did have a flaw on the 2nd panel but it's only noticeable when your up close. I lay on my bed when I can't sleep and stare at the water. I love it.

We put this in my mom's room, we put it up just her and I. Took maybe an hour and a half to two hours. Not too bad, and it looks amazing!!! Made her whole room come alive, and I especially love lounging in her room annoying her while she's on her iPad because it looks so freaking nice in her room. We stared at it for a while after we were done. We are planning to get another one for her room for the wall next to it. :)Shipped with UPS from Poland super fast, in about 3 days, and that's incredibly faster than any international package I have ever gotten in my shopping life.

Graphics on this print is great, but the material is very thin, and you have to be very careful when working with it. I purchased a full wall print 173" x 124" and it arrived in a 9-piece single roll. I had to cut and separate the 9 different sections from the roll. Where the issue really got sticky was when the graphics did not align properly. with each piece of the 9 sections the mural shortened. at the end I was left with a 1–2-inch gap from the top of the print to the ceiling that began in the middle of the print. Trying to get the print to march in earlier pieces left me some air gaps, but that was easily addressed. Now the print has been on the wall for a week or so I am noticing that the print is coming loose in several places. Too late to make a long story short so I will end with this, you better have some skill if you want to do a wall print. Do not rush the process, take your time, if you feel rushed wait and do it another day, you're going to have to dedicate some time to this project. In the end the graphics will look good, but disappointment will quickly settle in because the print is uneven and will leave a gap at the top or bottom of the print and even though it is very thin and very sticky, it will begin to release from the wall and leave bubbles in the print. My opinion, a waste of money and time.

It only took my husband and I an hour to put ours up in the gym. We had old panel walls and we’re surprised this went up as easy as it did.